How to downgrade from ADM 5.0.0RCG1 to ADM 4.3.3.RC92?

I have NAS AS5404T. After installing ADM 5.0.0RCG1, half of the programs do not work.
How to downgrade from ADM 5.0.0RCG1 to ADM 4.3.3.RC92?
It is impossible to create a request.
I think this is an appeal to technical support, there are no other ways to contact them.

Hi,

ADM 5.x is not yet available on all model … … due to APKG compatibility
… ADM 5. change kernel and libraries (based on Ubuntu 2404 when priori is based on Ubuntu 1804

Ex. for my Own APKG I have prepare the update but wait for delivery to test and verify software …

PLEASE don’t listen to bad advice to get a version before time :smiley:

You can try but … under your own responsibility and without complaint if it fail.

  1. save all your data … and eventually list of APKG you want to reinstall
  2. even not mandatory … clean ADM, remove APKG and return to the minimal state you can.
  3. download 4.3.3 ADM version for you model …
  4. use “Manual Install” in ADM update menu (in settings) to force install to 4.3.3 (if Asustor don’t add new control to lock this possibility)
    4 bis) if it fail (version mismatch) change version in /etc/nas.conf … to something like 4.3.2.ABCD (less than 4.3.3) and retry manual install.
  5. reboot
  6. re-install APKG and re-configure the NAS.

I never test with ADM 5.x … I don’t have it and don’t want to use an image build for another model and series.

Philippe.

Manual Install - Error (Ref. 6220 ) Update failed after 25%.
Updates down are blocked.
Please, more details about point 4.
I know Windows quite well, but little Linux.
If possible, for dummies. :smiley:

P.S.
By the way, WebUIformyHD does not work in the 5th version of ADM, because the web server does not work there.
MyHD is also not on the list of available ones.

Hi,

myHD is complex, so perhaps have problem with ADM 5 and integrated Xorg and in all case, I don’t have a new Ryzen NAS to understand if the graphics is AMD or Intel (with an external GPU) … so even working on Intel NAS … no idea and no tests on Rysen

For changing nas.conf … it’s not easy if you don’t have minimal expertise in Linux … I have imagine you have it for testing ADM 5 on a non validated NAS.
Modifying nas.conf can be dangerous … I do it for test, but I know how start using an USBlive boot and restore nas.conf in case …

So without any guaranty AT YOUR OWN RISK : just remember IT’S DANGEROUS backup all your data … and study recovery
Open a ssh terminal and connect as root / your_admin_password
then
verify actual ADM version
/usr/bin/confutil -get /etc/nas.conf Basic Version
if result is 5.0.0.RCG1 … the target is to change the version for a previous one … AND also previous last 4.3.3.RC92 ex.
/usr/bin/confutil -set /etc/nas.conf Basic Version 4.3.3.RC01
… now you can use WebUI and go to ADM Update … normally update to 4.3.3.RC92 will be proposed, or use manual update …

BUT if Asustor have, now, added other control … and update failed … return back
/usr/bin/confutil -set /etc/nas.conf Basic Version 5.0.0.RCG1 … if you can.

Philippe.
I have hesitate a lot before writing this dangerous method … parhaps not working on ADM 5.x

Everything worked out according to the instructions from here:
https://www.reddit.com/r/asustor/comments/1hlw3dq/how_to_downgrade_adm/?rdt=34446
I replaced 5.0.0 with 4.3.3.RC01.
After which it became possible to update to the current version 4.3.3.RC92.
Thank you all for your help!

Hi,
[quote=AMGIKT post_id=55126 time=1735543335 user_id=9646]
Everything worked out according to the instructions from here:

<LINK_TEXT text=“https://www.reddit.com/r/asustor/commen … ?rdt=34446”>https://www.reddit.com/r/asustor/comments/1hlw3dq/how_to_downgrade_adm/?rdt=34446</LINK_TEXT>

I replaced 5.0.0 with 4.3.3.RC01.

After which it became possible to update to the current version 4.3.3.RC92.

Thank you all for your help!
[/quote]

This morning (in France) I just remember that I forgot the 2 others flags BaseVersion and LastVersion … Fortunately you have get the info … It’s just very rare that we have to do it … (sorry for the incomplete information)



Philippe.

Hi all,

As per instructions from Asus Support I was able to downgrade from adm 5 to adm 4.3.3.XXXX

Here’s what I did

  1. I went to my NAS settings and activated SSH login (default port 22)
  2. I used Putty on Windows pc to ssh to my NAS
  3. I logon using an admin account
  4. Than I enter vi /etc/nas.conf (vi is an editor to edit the nas.config file)
  5. I replaced version, last version and base version by a version number lower than the version of the one you want to install (ex 4.3.2.R9Q2)
  6. To enter edit mode in vi (text editor) user the letter ‘’ i ‘’ . When done, hit ESC and then type :angry: to exit and save the fie
  7. Downgrade automatically or manually from the maintenance page

Now I have access to the NAS via SSH and to my data via windows mapped network drive but cannot use the web interface to logon. Even Asustor control app show my NAS but indicate Not Ready. Maybe this is due to the fact that I had a webserver installed (not other apps) before upgrading from version 4.XXX to 5.XXX.

I Did not received any further help from Asus support so I had to initialized the NAS to it’s factory settings (hard reset). I used the reset button in the back of the NAS (simple push=settings reset long push=hard reset)

BTW My NAS is AS6706T with four HD (raid 5)

Hope this help someone,

JP